Machine Room Less (MRL) Elevators

Our Machine Room Less (MRL) design keeps people and the environment in mind with compact and highly efficient Machines which consume little energy, yet deliver a very smooth and safe operation in combination with Beacon’s advanced control and drive system technology.

The birth of our Machine Room Less (MRL) products, catering for low to medium rise buildings, was a result of technological advancement and innovative research. The Permanent Magnet Synchronous (PMS) Gearless Drive unit is installed inside the shaft, eliminating the need for a stereotype Machine Room, and, hence reducing the construction cost. Furthermore, this allows more freedom and flexibility in the building’s architectural design.

View Civil Dimension
Passenger Elevator

WHAT IS PASSENGER ELEVATOR, HOW TO CHOOSE A PASSENGER ELEVATOR

A Passenger lift is designed to ferry people from point A to point B vertically. The modern passenger lift is a simple means of transport within a building. Passenger elevators capacity is related to the available floor space. Generally, passenger elevators are available in typical capacities from 4 to 26 passengers and speed varying between 0.5 Meter/Sec to 2.5 Meter/Sec.
Choice of passenger elevator typically depends on the type of building (Commercial, Residential, Hotel, Mall, Housing society, etc.), and passenger traffic movement. Budget involved is also a deciding factor between manual door and auto door passenger elevators. Beacon offers all types of passenger elevators whether auto door or manually operated doors with a variety of aesthetic choices for interior, flooring & false ceiling.

Over Mounted Main Engine (Standard Type)

Main Engine installed into the space between the shaft top car and the elevator shaft wall, control cabinet installed beside the top lifts door, so as to minimize the link between the control cabinet and the main engine for easier overall maintenance.

Traction System with Green Environment Protection

Weight of Permanent Magnet Synchronous (PMS) Traction Machine with the compact structure is only half of that of the traditional Traction Machine. Machine Room has been designed as the same as well as the area. It fully increases the utilization rate of construction. It reduces influence proportion of the machine room in the buildings.

Compact Control Cabinet

It applies Elevator special–purpose thin control cabinet that has been custom-made by Beacon. It effectively saves the well space and increase the utilization rate of building space through reducing thickness of control cabinet.

The Effective Energy Saving Car Lighting

Energy consumed by the car lighting shares approximately 40% of the total elevator energy consumption. Beacon applies the effective energy saving and long life LED lamps to replace the traditional halogen lights. The service life is 10 times higher than that of the halogen lights. It can save up to 80% of the energy cost.

Minimum Civil Dimension For Passenger Elevators Without Machine Room(MRL)

Load Car Inside Lift Well Entrance
PERSON KG A B C D E
4 272 700 1100 1700 1500 700
6 408 1000 1100 2000 1500 700
8 544 1100 1300 2100 1700 800
10 680 1300 1350 2300 1800 800
13 884 1100 2000 2100 2500 900
16 1088 1300 2000 2300 2500 1000
20 1360 1500 2000 2500 2500 1000
24 1632 1650 2150 2750 2650 1100

Note: In case of manually operated doors, clear entrance will be reduced by the amount of projection of handle on the landing door.

ELEVATOR OPERATIONS

SINGLE AUTOMATIC OPERATION

Automatic operation by the means of the button in the car for each landing level served and one button at each landing so arranged that if any car or landing button has been actuated, the actuation of any other car or landing operating button will have no effect on the movement of the car until the response to the first button has been completed.

DOWN COLLECTIVE AUTOMATIC OPERATION - ONE CAR (SIMPLEX)

The car stays at the main floor, which has an 'UP' button; upper floors have 'DOWN' button. The controller memorizes landing and car calls. Ideal for residential buildings, the car travels to the highest landing call, stopping at car calls only while going up. On the way down, it stops at all calls in sequence.

DOWN COLLECTIVE AUTOMATIC OPERATION - TWO CAR (DUPLEX)

Operates like the Simplex system, but with two cars: one parks at the main floor, the other at the top or midway if last stop was the main floor. When a call is received, the microprocessor sends the nearest car. For multiple calls, a car goes to the highest, then serves in downward sequence.

CLIENT SCOPE - Detailed Requirements

  • Three Phase Power Supply
    Provide Three Phase Power Supply near control panel with M.C.B. & E.L.C.B.
  • Scaffolding
    Provide scaffolding for entire erection period (approximately 15 days)
  • Temporary Power Connection
    Provide temporary power connection for erection & testing work
  • Access Permission
    Give free access in case work needs to be done after office hours
  • Shaft Construction
    Construct the shaft in accordance with GA Drawing
  • Earth Points
    Provide 2 Earth Points near Control Panel
  • Shaft Lighting
    Provide shaft lighting with plug points
  • Civil Material & Mason
    Provide mason with civil material for minor building work including grouting etc. during erection work
  • Machine Room Components
    Access to Machine room, Machine beams, Supporting beams, Machine room door, Machine room ladder, Loading hook etc.
  • Elevator Shaft Wall Finishing
    Provide Elevator Shaft wall to be plastered & painted
  • R.C.C. Column Design
    4 No. R.C.C. Columns to be designed by client for the given load

Quick Reference

  • Construct the shaft (230mm brick / 150mm RCC Walls) in accordance with our GA drawings.
  • Mason with material for minor builder's work such as pocket cutting, grouting, door fixing, etc.
  • Temporary power connection for erection & testing work.
  • Scaffolding till the time of erection for about 30 days.
  • Access to Machine room (if applicable).
  • Power supply (415 Volts, 3 Phase, 4 Wires with Neutral, 50 Hz. & 230 Volts 1 Phase) near our control panel with MCB/JUNCTION BOX.

Elevator Entrance Type

AUTO CENTER OPENING IMPERFORATED CAR DOOR AUTO CENTER OPENING IMPERFORATED CAR DOOR Drawing
AUTO CENTER OPENING IMPERFORATED CAR DOOR
AUTO TELESCOPIC DOOR AUTO TELESCOPIC DOOR Drawing
AUTO TELESCOPIC DOOR
CENTER OPENING AUTO DOOR CENTER OPENING AUTO DOOR Drawing
CENTER OPENING AUTO DOOR
COLLAPSIBLE DOOR COLLAPSIBLE DOOR Drawing
COLLAPSIBLE DOOR
MANUAL IMPERFORATED DOORS MANUAL IMPERFORATED DOORS Drawing
MANUAL IMPERFORATED DOORS
MANUAL SWING DOOR MANUAL SWING DOOR Drawing
MANUAL SWING DOOR
MANUAL TELESCOPIC DOOR MANUAL TELESCOPIC DOOR Drawing
MANUAL TELESCOPIC DOOR
MANUAL VERTICAL BI PARTING DOOR MANUAL VERTICAL BI PARTING DOOR Drawing
MANUAL VERTICAL BI PARTING DOOR

Our Prestigious Clients

BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
BPTP Logo
WhatsApp Chat Feature
WhatsApp Chat